
E-impulse
Strengthening enterprise competitiveness by investing in new systems based on IKT
Sensor Cartridge SC2 for toxic gases and oxygen
Exchangeable sensor including digital value processing, temperature compensation and self control for the continuous monitoring of the ambient air.Gas detection system
Gas detection sensors
Product Description
The sensor cartridge SC2 includes an electrochemical sensor element and an amplifier as well as a μController for measured values processing. All relevant data and measured values of the sensor element are stored fail-safe in the μController and transmitted digitally via the local bus to the sensor board SB2 or MSB2. The calibration management is also integrated in the μController of the sensor cartridge.
Calibration is done either by simply replacing the sensor cartridge or by using the comfortable, integrated calibration routine directly at the system.
APPLICATION
The PolyGard®2 Sensor Cartridge is used for the detection of toxic gases and oxygen.
- Power supply: 5 V DC from SB/MSB2, reverse polarity protected
- Power consumption: 50 mA, max. (0.25 VA)
- Serial interface local bus:1-wire / 19200 Baud
- Gas type: See Ordering Information
- Sensor element: Electrochemical
- Pressure range: Atmospheric ± 20 %
- Storage temperature range: +5 °C to +30 °C (+41 °F to +86 °F)
- Storage time: 6 months
- Housing M25: Polycarbonate
- Combustion: UL 94 V2
- Housing colour: RAL 7032 (light grey)
- Dimensions: M25 housing: (D x H) 24 x 22 mm (0.94 x 0.87 in.)
- Weight: ca. 30 g (0.07 lb)
- Protection class: IP 65
- Mounting: Screw mounting
- Connection type: 3-pin connector
- Cable length: 110 mm (4.33 in.)
- Directives:
- EMC directives 2014/30/EU
- CE
- Conformity to:
- EN 50271
- EN 61010-1:2010
- ANSI/UL 61010-1
- CAN/CSA-C22.2 No. 61010-1
- EN 50104 (for O2)